Power Supply: | 0.5 HP / 1 HP with 415 V, 50 Hz |
---|---|
Edge Sensing: | Hydro-Pneumatic |
Suitable for: | materials like film, PP, Non Woven, Fabric and Paper. |
Unsed in Machines: | Coating/Limionation, Printing, Slitting, Inspection, etc. |
Maintanance: | Low |
Performance: | Suitable for Heigh speed application |
Hydro pnewmatic Power Pack is Edge Guding System. It has specially design for corretion wrongly wound various type of materials. These systems where very compact. ecomical and accurate Edge Guiding System. This sytem can be used with varous type of movable trolley in various machine to correct web materials like film, PP, Non Woven, Fabric and paper. It can be used in Lamination/Coating, Printing, Slitting, Inspection machines etc.
Roller Length: | 280mm/400mm |
---|---|
Web Edge Sensing: | Feeler Lever |
Nip Roll Operating: | Pneumatic |
Operationg Pressure: | 1 Bar |
Used: | Textile Industries |
Maintanance: | Low |
Suitable Fabric: | Wet and Dry Fabric |
Performance: | Suitable for Heigh speed application |
These cloth Guiders were the most economical solution to guide your fabric during various fabric converting processess. Web edges sensing can be mechanically or sensor, these scanned feedback return to diaphragm or gearbox and it will pressure or release the nip roll. The web edges will be control by offset roller and nip pressure roller. These guiders were used in Pair (LH and RH) to center guide the web, it will be holding on guiding frame which is adjustable to different width webs.
No of Spindel: | 3 |
---|---|
Spindel Material: | Stainless Steel |
Suitable: | Harish type Stenter Machine |
Operation: | Motorized |
Power: | 0.5 HP |
Maintanance: | Low |
AEW Selvede Uncurler were the most economical solution to remove curling from both edges of your fabric material during various feeding of fabric at stenter machine. We supply Two/Three Fig. Uncurler base on customer's requiremnet. Web will uncurler by using spreader rollers at both edge of fabric. These curlurer were used in pair (LH and RH) to remove curling from both edges of fabric material.
These were various type of movable trolly base on customer's requirement which can be used with Edge Guiding system to correct the edges of various material during various roll converting process. It can be single roller, tow roller, three roller or six roller movable trolly. These units are used to automatically guide all type of flexible materials of any width, at any speed, under any load. Inherent capabilities of this units assure stable operation at all correcting the web at any speed and loads. Normally it can be used with Hydro-Pneumatic, Electronix Motorized Edge Guide System. Please contact us for more details.
Roll Width | 1000mm to 3500mm |
---|---|
Roll OD | 100mm, 125mm, 150mm |
Sleeve Material: | Natural, Synthetic Nitrile Rubber Material, MS, Aluminium |
This Bow roll were widely usded for wrinkle removing purpose in to many industries like paper, textile, plastic etc., It mainly consists of bowed shaft, metal segments, sealed ball bearings, abrasion resistant, rubber sleeve etc. 'AEW' make Expander Rollers (Bow Rollers) having very wide range of dimensions and suitable for equally wide range of applications and web materials. They are supplied with mounting brackets, which could be either wall mounting or foot mounting. The Expander Rollers we offer consist of bowed shafts, sealed ball bearings, abrasion resistant sleeve and metal segments. These are widely used as wrinkle remover devices in various industries and are available with us in various dimensions. It is know for its banana shape and it help to remove wrinkle in roll converting process from middle of its fabric.
Roll Width | 1000mm to 3500mm |
---|---|
Roll OD | 75mm to 150mm |
Material: | MS, Aluminum, SS 304/316, Ebonite |
Scroll rolls are wrinkle or curling removal rolls from web materials. It is widely used in textile processing, coating, and various type of roll converting machinery. It can be made from different materials like Ebonite, M.S, stainless steel, aluminum. For cloth processing machines ebonite or S.S. scroll rolls are used. These grooves "stretch" the web from the inside toward the edges, eliminating lengthwise wrinkles. Left Hand - Right Hand Grooving is applied to get maximum result.
Tension Control System is for precise tension & torque control solution in web converting industries. these system automatically control tension during various process of paper, file, foil, BOPP, Polyester, Rubber, Fabric and so on. When a web of these materials is unwound, web Tension must be maintained at a constant Level to Prevent wrinkles, sags, changes in width or thickness or breakage of the web. These kind of problems can be cured by using tension control system.
We mfg and supply all type of spares suitable for various type of slitting rewinding machines like drum slitting machine, center shaft slitting machine, cantilever type slitting machine, bopp tape slitting machine etc., we supply various type of MS, Nylon Gears, Knifes, Cutters, Bottoms, Paper cones etc.